A 3-way circuit — a single light controlled from two switches, like a hallway or stairway — is one of the most common reasons a smart switch order goes wrong. Most Wi-Fi smart switches are built for a single-location (single-pole) circuit, and bolting one into a 3-way setup without the right companion hardware either won't work or will leave the second switch location dead.

The good news is there are three well-documented ways to get a smart switch working on a 3-way circuit, and which one fits depends mostly on whether you want to touch the second switch's wiring at all.

Ready to compare specific models? Jump to our best smart light switches roundup for current picks, pros and cons, and pricing.

3-Way-Ready Smart Switch Kits: Our Top Picks

Each of these pairs a primary smart switch with the specific companion hardware that brand actually supports for a second switch location — not a generic switch that happens to also work solo.

As an Amazon Associate, Smart Home Pick Pro earns from qualifying purchases.

Lutron Caseta Smart Dimmer Switch + Pico Remote Control

Top Pick

9.6/10Editor’s score

Best if you don't want to run or touch wiring at the second location

  • The Pico remote is battery-powered and wireless, so the second switch location needs no traveler wire at all — it mounts with a wall bracket over the existing switch hole
  • Uses Lutron's dedicated Clear Connect radio, which stays reliable at 3-way range better than a Wi-Fi mesh
  • Works without a neutral wire at the primary switch, which helps in older homes

Watch out Needs the separate Lutron Caseta hub for app and voice control, and the Pico remote is a battery-powered accessory (not a hardwired switch) that you'll eventually need to replace batteries in.

Check price on Amazon

Lutron Pico Remote Control (companion for Caseta 3-way)

Runner-up

9.3/10Editor’s score

The companion piece for the Caseta setup above

  • Pairs directly to an existing Caseta switch or dimmer in seconds, no electrician needed
  • Comes with a wall-mount bracket sized to fit over a standard single-gang switch opening
  • Also works as a handheld remote if you'd rather not mount it at all

Watch out Only works with Lutron Caseta switches and dimmers — it's not a universal companion switch for other brands.

Check price on Amazon

Leviton Decora Smart Wi-Fi Switch + Decora Smart Switch Anywhere Companion

Best Value

9.0/10Editor’s score

Best for a wire-free 3-way companion on a Wi-Fi-only setup (no hub)

  • The Anywhere Companion communicates wirelessly with the primary switch, so it also skips running a traveler wire between the two boxes
  • Both pieces connect over Wi-Fi with no separate smart home hub required
  • Supports 3-way, 4-way, and 5-way configurations if more than two switches control the fixture

Watch out Requires a neutral wire at the primary Decora Smart switch location, same as most direct Wi-Fi switches.

Check price on Amazon

Enbrighten Z-Wave Smart Switch + Z-Wave Add-On Switch

Also great

8.7/10Editor’s score

Best if you're already using a Z-Wave hub like SmartThings or Hubitat

  • The Add-On Switch is purpose-built for 3-way (and 4-way) circuits and is the setup Enbrighten specifically documents for multi-location control
  • Z-Wave runs on its own mesh network rather than your Wi-Fi, which keeps a large smart home setup from overloading your router
  • Works with Alexa and Google Assistant once paired to a Z-Wave hub

Watch out Needs a separate Z-Wave hub (it's not a standalone Wi-Fi switch), and the Add-On Switch requires a wired traveler connection between the two switch boxes, unlike the wireless Lutron and Leviton companions above.

Check price on Amazon

Why a 3-way circuit trips up most smart switches

A single-pole circuit has one switch and a simple two-wire (plus ground) connection to the fixture. A 3-way circuit uses two switches and an extra 'traveler' wire running between them, so either switch can turn the light on or off independently. Most budget Wi-Fi smart switches, including several in our best smart light switches roundup, are designed and wired for the single-pole case — putting one in as a straight swap for just one of the two switches usually leaves the other switch doing nothing, or breaks the circuit entirely.

The fix isn't a smarter single switch — it's using a smart switch together with a second piece of hardware that's specifically designed to be its 3-way partner.

Option 1: a wireless companion remote (no new wiring)

Lutron's approach swaps the primary switch location for a Caseta smart dimmer, then replaces the second physical switch with a battery-powered Pico remote that talks to the dimmer wirelessly. Because the Pico needs no wiring at all, this is the least invasive option if the second switch location is hard to access or you'd rather not deal with a traveler wire.

Option 2: a wire-free companion switch

Leviton's Decora Smart Anywhere Companion works similarly in spirit — it mounts in the second switch's existing box and talks wirelessly to the primary Decora Smart switch, so you still get a real paddle switch at both locations without running a traveler wire between them. This is the better fit if you want the second location to still feel and look like a normal physical switch, not a remote.

Option 3: a wired companion switch on a hub-based system

Z-Wave brands like Enbrighten take the traditional electrician's approach: a dedicated Add-On Switch wires into the second switch box using the existing traveler wire, the same way a standard mechanical 3-way switch works today. This is the most 'normal' wiring-wise, but it does require a Z-Wave hub for the smart switch to talk to in the first place, and it keeps the traveler wire connection intact rather than replacing it with a wireless link.

What to check before you buy

Confirm 3-way support on the specific model, not just the brand — not every switch in a given lineup ships a matching companion, and a 'works with 3-way' claim sometimes only applies to certain SKUs. Also confirm whether the primary switch needs a neutral wire, since that's a separate requirement from 3-way support and older homes can lack one at either switch location.

If none of the companion options fit your situation — the wiring is unusual, or you just don't want to touch the second switch at all — a smart bulb sidesteps the whole problem, since it doesn't care how many physical switches are wired to it as long as both stay flipped to 'on.'

Frequently Asked Questions

Can I just put a smart switch at one location and leave a regular switch at the other?
No — a standard mechanical 3-way switch and a single-pole smart switch aren't wired compatibly, and mixing them typically breaks the circuit or leaves one location non-functional. You need either a matched companion (wireless or wired) designed for that specific smart switch, or a smart switch model explicitly rated for 3-way wiring with a standard companion.
Do I need an electrician to install a 3-way smart switch kit?
The wireless companion options (Lutron Pico, Leviton Anywhere Companion) are a DIY-friendly swap since there's no traveler wire to deal with at the second location. A wired companion like the Enbrighten Add-On Switch involves working with the existing traveler wire, so if you're not comfortable identifying and reconnecting wires with the breaker off, that's worth having an electrician handle.
Will any smart bulb work around the 3-way problem instead?
Yes, as long as both physical switches are left in the 'on' position so the bulb keeps receiving power. The tradeoff is that either switch getting flipped off cuts power to the bulb and drops it off Wi-Fi until it's flipped back on, so this only works well if everyone in the household reliably leaves both switches alone.
Does a 4-way circuit (three or more switches) work the same way?
The same general approaches apply, but you'll need an additional companion unit for each extra switch location — for example, two Pico remotes or two Add-On Switches instead of one. Check that the specific companion hardware you're buying explicitly supports 4-way before assuming it scales past a simple 3-way setup.

Keep reading